SIX MILES DEEP: THE VERIFICATION KIT The six-mile line of 2026-10-20, and how anyone can check it. WHAT IT CHECKS verify.py takes the published line and the water it was measured from, walks the line at evenly spaced points, and measures on the ground (geodesically, on the GRS 80 ellipsoid) how far each point is from the nearest water. Six statute miles is 9,656.064 metres. The published result is 4000 points, median 9656.05 m, from 9654.58 to 9657.19 m. WHAT YOU NEED Python 3.9 or later, and: pip install shapely pyproj (For the GRCA's own shapefiles also: pip install pyogrio) HOW TO RUN IT 1. With the files in this folder: python3 verify.py ../six-miles.geojson This measures the line against the water carried in the same file. That water is a lighter copy, kept small enough to download. Run here, it gives 3982 points, median 9655.48 m, from 9653.84 to 9711.29 m, 86% of points within 1.5 m of six miles. The points that stand further out are where the lighter copy has lost detail of the banks and of the flow line through the reservoirs; the full check is step 2. 2. Against the Grand River Conservation Authority's own data (recommended): Download "Surface Hydrology - Watercourse" and "Waterbody" from the GRCA open data catalogue (data.grandriver.ca). Check their fingerprints: Watercourse.zip SHA-256 dc71349c74a97a1be0b80d8ec99aae3cf456d5a6dad708528899d39cf4e16b9f Waterbody (river polygons, as received) SHA-256 5678611fd6686bea06d12adafe98d114ed464ebd8df6635503ea087d5700fd5b then: python3 verify.py ../six-miles.geojson --water Waterbody.zip --water Watercourse.zip Where the river is under 30 m wide the GRCA maps it as a line; the method measures from its recorded edge (half its BUFFER_WIDTH). verify.py does the same when the layer carries BUFFER_WIDTH. 3. Fingerprint of the published line file: six-miles.geojson SHA-256 e775b1842d4243e8f630f0844883c20d74e471c09ab36d536178c7d0ee86f038 WHAT A GOOD RESULT LOOKS LIKE Most points within a metre or two of 9,656 m. Points on the two rounded ends (grade D) and through reservoirs (grade C) are measured as the method says; their grades tell you how they were drawn. WHO SHOULD CHECK IT Anyone. An Ontario Land Surveyor or a university GIS department running this and signing the result is the independent check the Nation asks for.